Peel Back Tester Digital VBTD
1.1 General information
Peel back tester digital is equipped with an electronically controlled dimpled plate with digital temperature indicator, funnel, two trays, and handle to turn heating plate.
1.2 General Usage
Peel back tester digital is used for finding the percentage of the plastic semi cured subsurface layer of shell sand, which peels away.
1.3 Product Data
Product Name:
Peel Back Tester Digital
Product Code:
VBTD
Order Reference Code:
V0000056
Electrical Supply Required:
230v 50Hz A.C. (Default)
110v 60 Hz A.C (Optional)
Single Phase, Stabilized with Over/ Under Voltage cut-off.
Electrical Plug:
M type : 15 Amp Plug
Typical Maximum Current:
9.0 A at 230V
Compressed air Supply:
Not Required
Communication:
Not Applicable
Dimensions:
460x315x530 mm (WXBXH)
Packing Dimensions:
610x450x625 mm (WXBXH) Typical
Net Weight:
Approximately 24 kg
Gross Weight:
Approximately 31 kg
Colour:
Factory Default
Measuring Range:
Not Applicable
Traceable to:
Manufacturers Standards
Least Count:
Not Applicable
Specimen Requirements:
Not Required
Operating Temperature:
0-50 degrees Celsius
Testing Standards:
BIS: Standard
AFS: Optional
Calibration Frequency:
12500 nos. of Testing Cycles or Once in Year
2.1 Scope of supply
- Peel Back Tester Digital.
- Tray – 02 nos.
- Spatula flat.
- Assy funnel.
- Calibration certificate.
- Instruction manual.
3.1 Recommended pre-requisite equipment
Sand Splitter : To get representative sample
Hot Air Blower Mixer VHA
Digital weighing scale.
Stop watch.
Vernier calliper.
4.1 Recommended Calibration kits
VKHC: For Temperature
4.2 Recommended attachments
NA
4.3 Alternative equipment
Peel Back Tester VBT
5.1 Consumables
NA