Description
1.1 General information
This handheld equipment consists of a Dial indicator with Special tip designed for measurement of mould strength directly on mould.
1.2 General Usage
Tip of the equipment is pressed against mould surface to observed mould strength in kg/cm2.
1.3 Product Data
|
Product Name: |
Mould Strength Tester |
|
Product Code: |
VMS |
|
Order Reference Code: |
V0000085 |
|
Electrical Supply Required: |
Not Required |
|
Electrical Plug: |
Not Applicable |
|
Typical Maximum Current: |
Not Applicable |
|
Compressed air Supply: |
Not Required |
|
Communication: |
Not Applicable |
|
Dimensions: |
190x120x40mm (WXBXH) |
|
Packing Dimensions: |
230x230x130 mm (WXBXH) Typical |
|
Net Weight: |
Approximately 0.750 kg |
|
Gross Weight: |
Approximately 1.1 kg |
|
Colour: |
Factory Default |
|
Measuring Range: |
0-2 Kg/cm2 |
|
Traceable to: |
NABL Standards |
|
Least Count: |
0.05 Kg/cm2 |
|
Specimen Requirements: |
Not Required |
|
Operating Temperature: |
0-50 degree Celsius |
|
Testing Standards: |
BIS: Standard AFS: Not Applicable |
|
Calibration Frequency: |
22500 nos. of Testing Cycles or Once in Year |
2.1 Scope of supply
- Hand-held equipment.
- Head Pipe Cap.
- A box to house the equipment when not in use.
- Calibration certificate.
- Instruction manual.
3.1 Recommended pre-requisite equipment
NA
4.1 Recommended Calibration kits
VKMC: Calibration Kit for Mould & Core Hardness Tester
4.2 Recommended attachments
NA
4.3 Alternative equipment
VCAT Mark II
5.1 Consumables
NA
