Description
1.1 General information
The equipment consists of split tube, locking springs and drying plate.
1.2 General Usage
This equipment used for prepare standard cylindrical specimen of sand having low strength. It replaces the standard specimen tube and is used for ramming the specimen.
1.3 Product Data
|
Product Name: |
Split Specimen Tube |
|
Product Code: |
VST |
|
Order Reference Code: |
V0000019 |
|
Electrical Supply Required: |
Not Required |
|
Electrical Plug: |
Not Applicable |
|
Typical Maximum Current: |
Not applicable |
|
Compressed air Supply: |
Not Required
|
|
Communication: |
Not Applicable |
|
Dimensions: |
92x160x125mm (WXBXH) |
|
Packing Dimensions: |
230x230x130mm (WXBXH) Typical |
|
Net Weight: |
Approximately 1.3 kg |
|
Gross Weight: |
Approximately 2 kg |
|
Colour: |
Factory Default |
|
Measuring Range: |
Not Applicable |
|
Traceable to: |
Manufacturers Standards |
|
Least Count: |
Not Applicable |
|
Specimen Requirements: |
Not Required
|
|
Operating Temperature: |
0-50 degrees Celsius |
|
Testing Standards: |
BIS: Standard AFS: Optional |
|
Calibration Frequency: |
4500 nos. of Testing Cycles or Once in Year |
2.1 Scope of supply
- Split specimen tubes.
- Locking springs.
- Drying plates
- Instruction manual.
3.1 Recommended pre-requisite equipment
Sand Rammer VR
4.1 Recommended Calibration kits
NA
4.2 Recommended attachments
- NA
4.3 Alternative equipment
- NA
5.1 Consumables
- NA
