Description
1.1 General information
The equipment consists of a Motorized Stirring mechanism, Timer, Glass Jar & Syphon for syphon-out the muddy water.
1.2 General Usage
This equipment is used for sample of the sand is thoroughly agitated in alkaline solution. The clay remains in suspension, which is separated from the sample.
1.3 Product Data
|
Product Name: |
Clay Washer |
|
Product Code: |
VCW |
|
Order Reference Code: |
V0000007 |
|
Electrical Supply Required: |
230v 50Hz A.C. (Default) 110v 60 Hz A.C (Optional) Single Phase, Stabilized with Over/ Under Voltage cut-off. |
|
Electrical Plug: |
M type : 6 Amp Plug |
|
Typical Maximum Current: |
2.6 A at 230V |
|
Compressed air Supply: |
Not Required
|
|
Communication: |
Not Applicable |
|
Dimensions: |
250x190x620mm (WXBXH) |
|
Packing Dimensions: |
410x410x890mm (WXBXH) Typical |
|
Net Weight: |
Approximately 9.2 kg |
|
Gross Weight: |
Approximately 12 kg |
|
Colour: |
Factory Default |
|
Measuring Range: |
Not Applicable |
|
Traceable to: |
Manufacturers Standards |
|
Least Count: |
Not Applicable |
|
Specimen Requirements: |
Not Required
|
|
Operating Temperature: |
0-50 degrees Celsius |
|
Testing Standards: |
BIS: Standard AFS: Optional |
|
Calibration Frequency: |
4500 nos. of Testing Cycles or Once in Year |
2.1 Scope of supply
- Clay washer.
- Glass Jar, Syphon & Wash bottle.
- Assy Sieve (53 Mic.)
- Working condition certificate.
- Instruction manual.
3.1 Recommended pre-requisite equipment
Sand Splitter : To get representative sample
Rapid Dryer VRD.
4.1 Recommended Calibration kits
NA
4.2 Recommended attachments
- NA
4.3 Alternative equipment
- Auto Clay Washer VCWA
-
Auto Clay Washer VCWA I
5.1 Consumables
- Demineralized Water
- Sodium hydroxide
