Wet Tensile Tester VWT

Wet Tensile Tester VWT

The Wet Tensile Tester VWT is the perfect choice for testing the wet tensile strength of green sand. It offers precise and accurate results, and is designed for easy operation and data collection. With its intuitive user interface and reliable…

Categories: , , ,

Request a quote

Description

The Wet Tensile Tester VWT is the perfect choice for testing the wet tensile strength of green sand. It offers precise and accurate results, and is designed for easy operation and data collection. With its intuitive user interface and reliable performance, this tester is an ideal choice for any laboratory testing needs. It is also highly durable and able to withstand the demanding conditions of the testing environment. With its superior technology, the Wet Tensile Tester VWT is the perfect choice for green sand testing.

1.1 General information

Wet Tensile Tester is equipped with a loading mechanism, heating mechanism and sensing mechanism which are controlled by Microcontroller or PLC and observed on LCD display.

1.2 General Usage

Specimen held in a tube with special tube cap is placed on the specimen tube seat. On press of start button, after curing time the equipment shows wet tensile reading.

1.3 Product Data

Product Name:

Wet Tensile Tester

Product Code:

VWT

Order Reference Code:

V0000037

Electrical Supply Required:

230v 50Hz A.C. (Default)

110v 60 Hz A.C (Optional)

Single Phase, Stabilized with Over/ Under Voltage cut-off.

Electrical Plug:

M type : 15 Amp Plug

Typical Maximum Current:

6.9 A at 230V

Compressed air Supply:

5 Kg/cm2 Dry Air

Communication:
  • RS485 MODBUS RTU
  • RS232 Serial
  • Ethernet (Optional)
  • CloudSync using V-Sync

Dimensions:

350 X 460 X 535 mm (WXBXH)

Packing Dimensions:

450 mmx 560mm x 685 mm (WXBXH) Typical

Net Weight:

Approximately 53 kg

Gross Weight:

Approximately 63 kg

Colour:

Factory Default

Measuring Range:

60 Gm/cm2

Traceable to:

NABL Standards

Least Count:

0.05 Gm/cm2

Specimen Requirements:

Required

Operating Temperature:

0-50 degrees Celsius 

Testing Standards:

BIS: Standard

AFS: Optional

Calibration Frequency:

22500 nos. of Testing Cycles or Once in Year

2.1 Scope of supply

  • Wet Tensile Tester.
  • Special tube, Special tube cap & Special pedestal cup
  • Calibration dead weights set
  • Hand gloves set asbestos
  • Calibration certificate.
  • Instruction manual.

3.1 Recommended pre-requisite equipment

Sand Splitter : To get representative sample

Specimen preparation equipment’s to make a standard AFS or Metric specimen.

4.1 Recommended Calibration kits

VKHC: For Temperature

Calibration dead weights

4.2 Recommended attachments

NA

4.3 Alternative equipment

NA

5.1 Consumables

NA

Related products