Description
1.1 General information
Grain size calculator is equipped with a sensing mechanism which are controlled by PLC and observed on screen touch HMI display.
1.2 General Usage
To calculate the grain size of raw shell sand after sieving. This is specially developed for this purpose & not for any other commercial use.
1.3 Product Data
|
Product Name: |
Grain Size Calculator |
|
Product Code: |
VAFS I |
|
Order Reference Code: |
V0000110 |
|
Electrical Supply Required: |
230v 50Hz A.C. (Default) 110v 60 Hz A.C (Optional) Single Phase, Stabilized with Over/ Under Voltage cut-off. |
|
Electrical Plug: |
M type : 15 Amp Plug |
|
Typical Maximum Current: |
1.2 A at 230V |
|
Compressed air Supply: |
Not Required |
|
Communication: |
|
|
Dimensions: |
400x315x275 mm (WXBXH) |
|
Packing Dimensions: |
500x415x425 mm (WXBXH) Typical |
|
Net Weight: |
Approximately 29 kg |
|
Gross Weight: |
Approximately 38 kg |
|
Colour: |
Factory Default |
|
Measuring Range: |
Weight: 400 Grams |
|
Least Count: |
Weight: 0.01 Grams AFS: 0.01 Number |
|
Traceable to: |
NABL Standards |
|
Specimen Requirements: |
Not Required |
|
Operating Temperature: |
0-500C |
|
Testing Standards: |
BIS: Standard AFS: Not Applicable |
|
Calibration Frequency: |
1950 nos. of Testing Cycles or Once in Year |
2.1 Scope of supply
- Grain Size Calculator.
- Calibration certificate.
- Instruction manual.
3.1 Recommended pre-requisite equipment
There are three types of equipment’s to choose from:
Sieve Shaker VGH (Educational Purposes)
Sieve Shaker VGH II
Sieve Shaker VGH III
4.1 Recommended Calibration kits
Dead Weights
4.2 Recommended attachments
NA
4.3 Alternative equipment
Grain Size Calculator VAFS
