Description
1.1 General information
Digital Compactibility Tester is equipped with a squeezing mechanism and sensing mechanism which are controlled by PLC and observed on screen touch HMI.
1.2 General Usage
To check compactibility & to prepare standard specimen under identical condition for checking important physical properties of moulding sand.
1.3 Product Data
|
Product Name: |
Digital Compactibility Tester |
|
Product Code: |
VCCD I |
|
Order Reference Code: |
V9001344 |
|
Electrical Supply Required: |
230v 50Hz A.C. (Default) 110v 60 Hz A.C (Optional) Single Phase, Stabilized with Over/ Under Voltage cut-off. |
|
Electrical Plug: |
M type : 15 Amp Plug |
|
Typical Maximum Current: |
1.5 A at 230V |
|
Compressed air Supply: |
5 Kg/cm2 Compressed Dry Air |
|
Communication: |
|
|
Dimensions: |
465x320x670 mm (WXBXH) |
|
Packing Dimensions: |
565x420x780 mm (WXBXH) Typical |
|
Net Weight: |
Approximately 53 kg |
|
Gross Weight: |
Approximately 63 kg |
|
Colour: |
Factory Default |
|
Measuring Range: |
0 to 52 % |
|
Traceable to: |
NABL Standards |
|
Least Count: |
0.1 % |
|
Specimen Requirements: |
Not Required |
|
Operating Temperature: |
0-500C |
|
Testing Standards: |
BIS: Standard AFS: Optional |
|
Calibration Frequency: |
22500 nos. of Testing Cycles or Once in Year |
2.1 Scope of supply
- Digital Compatibility Tester.
- Specimen tubes, Pedestal cup & Stripper.
- Calibration certificate.
- Instruction manual.
3.1 Recommended pre-requisite equipment
Sand Splitter : To get representative sample
Tube Filler Accessory VTF.
Weighing Balance (LC 10mg)
4.1 Recommended Calibration kits
Calibration Piece High VCCD
Calibration Piece Low VCCD
4.2 Recommended attachments
NA
4.3 Alternative equipment
Sand Squeezer VCC.
Digital Compactibility Tester VCCD.
