Description
1.1 General information
Sleeve Compression Tester is used to determine the maximum compression load which exothermic / insulating sleeve can withstand.
1.2 General Usage
Keep the sleeve on plunger plate & press of start button, within few seconds the equipment shows compression load. This equipment is suitable for the sleeve 250 mm max. dia. &150 mm max height
1.3 Product Data
|
Product Name: |
Sleeve Compression Tester |
|
Product Code: |
VSC |
|
Order Reference Code: |
V0000095 |
|
Electrical Supply Required: |
230v 50Hz A.C. (Default) 110v 60 Hz A.C (Optional) Single Phase, Stabilized with Over/ Under Voltage cut-off. |
|
Electrical Plug: |
M type : 15 Amp Plug |
|
Typical Maximum Current: |
5.5 A at 230V |
|
Compressed air Supply: |
Not Required |
|
Communication: |
NA |
|
Dimensions: |
480x385x880mm (WXBXH) |
|
Packing Dimensions: |
600x500x1050mm (WXBXH) Typically |
|
Net Weight: |
Approximately 110 kg |
|
Gross Weight: |
Approximately 115 kg |
|
Colour: |
Factory Default |
|
Measuring Range: |
0-2000 Kg. |
|
Traceable to: |
NABL Standards |
|
Least Count: |
0.5 Kg |
|
Specimen Requirements: |
NA |
|
Operating Temperature: |
0-50 degree Celsius |
|
Testing Standards: |
Not Applicable |
|
Calibration Frequency: |
15000 nos. of Testing Cycles or Once in Year |
2.1 Scope of supply
- Sleeve Compression Tester.
- Lifting Handle (04 Nos.)
- Loading hand wheel.
- Calibration certificate.
- Instruction manual.
3.1 Recommended pre-requisite equipment
NA
4.1 Recommended Calibration kits
Force measuring device.
4.2 Recommended attachments
NA
4.3 Alternative equipment
NA
5.1 Consumables
NA
